How to Enter Service Mode in Canon Printer series
Below is a guide how to enter service mode in most Canon printer series. Basically it is easy to enter service mode which is required before resetting waste ink counter. So we’ll explain you how to enter Printer Service Mode before resetting ink counter on Canon printers in step-by-step tutorial. Ready..? so here it is:Steps to Put Canon Printers in Service Mode:
1- Firstly you need to turn off the printer if the printer power on. Then remove
the printer USB cable from your computer.
2- While the printer is OFF, press and hold the Start/Stop button. For sevetral
canon printers models it is Resume/Cancel button (press and hold it).
3- While holding Start/Stop button or Resume/Cancel button, press and hold the
POWER button in the same time.
4- When the POWER LED (green light) lit, release the Start/Stop or resume/cancel
button (while still holding the POWER button).
5- Still holding the power button, Press the Start/Stop button or resume/cancel
button TWICE then Release the POWER button. Wait until LCD printer to display 0
(zero) number.
6- Once it is 0, attach the printer USB cable to your computer, it will be
detected new device installed (its normal).
You are now completely in Service Mode, so you can continue to make some
adjustment, do maintenance, or even reset it using Canon resetter software.
0 comments:
Post a Comment